Camera Baseplate- Universal for all cameras
Top grade, quality construction
Lightweight at only 960 grams with near endless adjustability to fit you and your camera.
BalanceVCT Pro based camera rigs are all about finding perfect balance for your camera. Our lightweight, adjustable rod mount is set far back in the plate, offering plenty of accessory-capable area under the camera lens. This allows you to position your camera further back on the plate, keeping the balance point of your rig directly over your shoulder. The shoulder pad portion of the VCT Pro is set as far forward on the plate as possible to maximize your accessory capable rod area and aid with balance. Our elegant sliding top plate enables quick lens changes and lets you take your camera off the rig in seconds. This top plate with mounting screw tracks is also a key balancing feature. The VCT Pro camera baseplate offers 10” of camera balance sliding range.
Adjustable Rod Riser
Low ProfileKeeping the camera low prevents already tall cameras from being too top heavy. With our VCT, the distance from the bottom of your camera to your shoulder is just 1.2".
“I've been looking for the perfect universal shoulder mount for ages. So far the new VCT Pro is about as close as it gets. Love it. The original design was good, but having the new sliding plate means I can balance the camera super quick, whatever the camera package.”
-Dan Chung, Cinematographer, founder newsshooter.com
Foundation of the Next Generation Recoil Rigs
|BUY NOW||VCT Pro||$650|
|BASIC FEATURES||14.25” x 4.25” x 2” (LxWxH) with 6.5” rods||Two quick releasable 6.5” rods included|
|Weighs 960 grams||Two quick-release rod ports in the back|
|Wide gel-polymer shoulder pad||One ¼ 20 & ⅜ 16 removable screws included|
|One Arri M6 rosette on right side|
|ADJUSTABILITY||Lightweight adjustable rod mount|
|25mm of vertical adjustment|
|10” of camera balance sliding range|
|Unique sliding top plate to quickly adjust for lens changes or to release the camera from your rig|
|COMPATIBILITY||Unique design creates more accessory rod capable area|
|V-wedge style tripod connector or directly mount your tripod plate via ¼ 20 & ⅜ 16 screw holes|
|¼ 20 screw holes along the side for accessory mounting options|