Dual Trigger Grip Base
The Dual Trigger Grip Base is the first thing you need to build your dual grips. It acts as a “double sleeve” and you can pick your two handgrips; our classic wooden grip to the left side for balance, comfort and flexibility a camera specific grips to the right side for camera controls at your fingertips.
The Dual Trigger Grip Base slides onto 15mm lightweight rods. They allow for single-handed 360° rotation with the simple press of a trigger. The two handles rotate independently of each other. Flip them down for a low, rock-solid handgrip. Raise it up for more of an Aaton style position. Or quickly flip them both all the way up to set your camera flat on the ground or for storing in a case. Or stagger them if that is more comfortable you. The length of the handgrips can also adjust- they can go from 13” to 16” measuring from the base to the bottom of the handgrip.
Here are the options for building your Dual Trigger Grips
Wooden Trigger Grip- gives you a classic wooden handgrip
EVA1 Trigger Grip- relocates the Panasonic EVA1 camera grip
Rosette Trigger Grip- relocates the Canon C200, C300 Mark III, Canon C500 Mark II, Canon 18-80, Blackmagic Ursa, Panasonic Varicam LT, Tilta Nucleus M Hand unit, or any other Rosette based camera grip
Canon C100, C300, and C500 Grip- relocates the Canon C100 series, C300 series or C500 camera grip
Sony Grip- relocates the Sony FX6, FS5 series camera grip
NOTE: Sony FS7 or FS7 Mark II dual grips can't be built with the standard base. To buy dual handgrips for the FS7: