Français - French Español - European Spanish Italiano - Italian Deutsch - German বাংলা - Bengali اُردو - Urdu हिन्दी - Hindi الْعَرَبيّة - Arabic Svenska - Sweedish 한국말 - Korean 简体中文 - Simplified Chinese 簡體中文 - Traditional Chinese 日本語 - Japanese Dansk - Danish Pусский язык - Russian ελληνικά - Greek Português - Portugese

 
 
NEW PRODUCTS - NAB 2008    Booth C8015

QML $198 Q-mount Lightweight – Zacuto universal Z-Release mount for 15mm rod systems.  Used to mount Zamerican arms, other arms with Zacuto ZUD adapters or 15mm rods.  Create a lens support by adding a ½” to ¼ 20 adapter or Zacuto lens support paired with a short 15mm rod.  New design allows the Q-Mount to be installed on the rod system without removing any equipment.  The Q-Mount can be attached to 15mm rods at any point by mounting from underneath and tightening outer levers. 
QMS $250 Q-Mount Studio – Zacuto universal Z-Release mount for 19mm rod systems.  Used to mount Zamerican arms, other arms with Zacuto ZUD adapters or 15mm rods.  Create a lens support by adding a ½” to ¼ 20 adapter or Zacuto lens support paired with a short 15mm rod.  New design allows the Q-Mount to be installed on the rod system without removing any equipment.  The Q-Mount can be attached to 15mm rods at any point by mounting from underneath and tightening outer levers. 

 
ZM-1 $79 Zoupler Male -  Use this Zoupler (coupler) in-between two Zacuto female threaded rods to connect them with this coupling device.  Tighten the Allen screw on the Zoupler, the rods are locked and can’t unwind.
ZF-1 $67 Zoupler Female - Use this Zoupler (coupler) in-between two Zacuto male threaded rods to connect them with this coupling device.  Tighten the Allen screw on the Zoupler, the rods are locked and can’t unwind.
ZU-BE $72 ZUBE -  Male/Female - Use the ZUBE (coupler) in-between Zacuto male and female threaded rods to connect them with this coupling device.  Tighten the Allen screw on the Zoupler, the rods are locked and can’t unwind.
Z-Bi $290 Bi-Mount (ZUBE & Double Z-Release) The Bi-Mount can screw into any Zacuto female threaded rod and quickly give you two Zacuto Z-Release mounts for mounting Zamerican arms, ZUDS or rods.  An Allen screw prevents the ZUBE from rotating.  Additionally the back of the ZUBE is female threaded and can accept a male rod to continue the rod.  This can come in handy and gives you the ability to have the ZUBE anywhere in your rod system.
Z-FF-1 $1110

Z-Focus (Zacuto Follow Focus) - The Zacuto Z-Focus creates accurate repeatable focus pulls for dialogue and other scenes requiring shifting repeatable focus.
The Zacuto Z-Focus (Follow Focus) features includes:
- Completely gear-driven design for slip-free, accurate movement
- Worm gear adjustment screw to allow user to tighten gear play
- Interchangeable drive gears, standard is 0.8 film pitch
- Other drive gears in Fuji .6, Canon .5 & 1 inch wide .8 pitch for photo lenses.
- Magnetic dry erase marking disk
- Standard accessory port for Zacuto or Chrosziel follow focus whip, speed crank, etc.
- Industry-standard 15mm lightweight rod mounted
- Lightweight design
- Accessory FF-Adapter converts Z-Focus to 19mm/15mm studio rods
Z-FF-SA $255

FF-Adapter (Z-Focus Studio Adapter) – Converts your Zacuto follow focus (Z-Focus) to 19mm/15mm Studio rods.  Perfect for RED camera packages.  This makes the Zacuto Z-focus work exclusively for studio rod spacing and for the use of other studio rod equipment.  All of this is done without converting to lightweight rod spacing.

 

Z-Gun-S

 

 $237

Gun Stock – The Gun Stock is an articulating shoulder mount that can attach to a Zacuto female 15mm rod.  This can be used with Zgrips or Zacuto single handgrip setups.  It fits nicely in your shoulder/armpit just like a rifle stock and together with your two arms gives you nice 3 point handheld camera stability.

 
ZM-2 $92

Zicro Mount II (with optional camera pin) The Zicro Mount II has the ability to have 2 screws so monitors like the LH900 can be attached and will not rotate when locked on a Zamerican arm.  When using the additional monitor claws single screw monitors will be prevented from rotating.  By adding the optional camera locking pin the Zicro Mount II can be used as a mini Baseplate for small cameras allowing for quick-release onto tripods and Zamerican arms for press conference high angle quick shooting.
Incl.  (2) L screws to lock monitor,  (1) 1/4 20 screw
Optional:  Z-CMP  camera mounting pin $8
Optional:  Z-1420 1/4 20 screw  $12

 
Z-MO-2 $144 Z-mount II – The Z-Mount allows you to mount a monitor or any device on a 15mm lightweight support rod. Ideal for mounting a monitor to Zacuto Zgrips or a Baseplate rod. This is a must for every DP or AC since it serves as a basic rigging device. It has the patented Zacuto Z-locks that prevents rods from twisting or loosening.  The Z-Mount II like the original accept is aligned to be directly in the center of 15mm standard spaced rods.  Create a lens support by adding a ½” to ¼ 20 adapter or Zacuto lens support paired with a short 15mm rod.  
Z-R-1 $98 Z-Rail (100mm Sliding Z-lock) – Variable spaced rod bracket.  With this device, you can mount any size Z-Lock hard mounted on one end and the other end can slide in a rail up to 100mm.  A third Z-lock could be added as well.  Z-locks are either 19mm, 15mm or 5/8”.  Does not include Z-Locks.
Zup-1  $82 Zupport – Zacuto Lens support – The Zupport screws into the bottom of any Zacuto male rod.  Using, either Zacuto’s Q-Mount Lightweight, Q-Mount Studio or Z-Mount II and align to lens level to add support to lenses. A Zacuto ZipGear fits into the precut teeth, wrap ZipGear around the lens and tighten with locking housing so the lens will not be able to rotate. 
Z-J-1 $265

Jeep (universal rod adapter) – Bridges the gap between 15mm at 60mm spacing to 19mm studio rods at 104mm spacing and 15mm rods at 100mm spacing.  The Jeep can retrofit Zacuto Z-LWS to have all three rod choices available and adjustable on a standard 2/3" style ENG camera.  It can also retrofit the front of a Zacuto baseplate to have all three rod choices available, while still having counterbalance rods off the back in standard 15mm lightweight for DoubleMounts or Lunchboxes.

 
Z-RED-ZM $249 RED Camera Zdapter mount – Great mount for RED cameras that allows you to quick-release you monitor or EVF with a flip of a red Zacuto lever.  Mounts on 19 or 15mm rods and adapts the RED arm with the included Zacuto ZUD to be quick-releasable. This prevents any unwinding and allows for Zacuto rod extensions to make the RED arm longer.
ZH1 $100 Z-Handle – Zacuto’s multi-purpose carrying handle.  Any size female rod can insert into the handle and tighten with the Allen screws.  The handle like all of Zacuto equipment then becomes quick-releasable and quickly moved to where it is needed.
ZARM-L2 $215 Zamerican II Large - 12 inch (305mm) articulating arm – Second generation of the new standard, "Zamerican".  It is built with Z-Release, giving you quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever.  No more screwing and un-screwing and no more coming loose.  Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Improvements include, 20% lighter then the original Zamerican arm.  New chrome balls for silky movement.  Aluminum ends reduce rust and make for smooth mounting.  Stainless pivot makes for stronger less bulky, scratch resistant use.  Roll form screw shaft is stronger.  Teflon washers make for smooth lever tightening. 
 
ZARM-M2 $205 Zamerican II Medium - 9 inch (229mm) articulating arm – Second generation of the new standard, "Zamerican".  It is built with Z-Release, giving you quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever.  No more screwing and un-screwing and no more coming loose.  Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Improvements include, 20% lighter then the original Zamerican arm.  New chrome balls for silky movement.  Aluminum ends reduce rust and make for smooth mounting.  Stainless pivot makes for stronger less bulky, scratch resistant use.  Roll form screw shaft is stronger.  Teflon washers make for smooth lever tightening. 
ZARM-S2 $195 Zamerican II Small - 6 inch (152mm) articulating arm – Second generation of the new standard, "Zamerican".  It is built with Z-Release, giving you quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever.  No more screwing and un-screwing and no more coming loose.  Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Improvements include, 20% lighter then the original Zamerican arm.  New chrome balls for silky movement.  Aluminum ends reduce rust and make for smooth mounting.  Stainless pivot makes for stronger less bulky, scratch resistant use.  Roll form screw shaft is stronger.  Teflon washers make for smooth lever tightening. 
ZARM-M2-1BP $175 Zamerican Jr. Medium - Medium 8 inch (203mm) articulating arm (with one ball pivot)  – Second generation of the new standard, "Zamerican".  It is built with Z-Release, giving you quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever.  No more screwing and un-screwing and no more coming loose.  Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Improvements include, 20% lighter then the original Zamerican arm.  New chrome balls for silky movement.  Aluminum ends reduce rust and make for smooth mounting.  Stainless pivot makes for stronger less bulky, scratch resistant use.  Roll form screw shaft is stronger.  Teflon washers make for smooth lever tightening. 
ZARM-S2-1BP $165 Zamerican Jr. Small - 5 inch (127mm) articulating arm (with one ball pivot) –  Second generation of the new standard, "Zamerican".  It is built with Z-Release, giving you quick release action using Zacuto's new Z-lock technology. Accessories install and remove with the flip of a lever.  No more screwing and un-screwing and no more coming loose.  Zamerican arms can be extended using Zacuto male rod extensions making articulating arms any length you want them to be. Improvements include, 20% lighter then the original Zamerican arm.  New chrome balls for silky movement.  Aluminum ends reduce rust and make for smooth mounting.  Stainless pivot makes for stronger less bulky, scratch resistant use.  Roll form screw shaft is stronger.  Teflon washers make for smooth lever tightening. 
Z-RC-1 $12 ½ Rod cap – Can be used to under-sling 15mm rods or Zamerican arms to prevent them from accidentally falling.  1/2 inch thread
Z-W1 $149 Zwip  Second generation Zacuto 16 inch follow focus whip.  The Zwip is the new and improved Zacuto whip.  It is more flexible and has vinyl covering.  Works with Chrosziel, Zacuto and all follow focus units with standard square connector.